home *** CD-ROM | disk | FTP | other *** search
- PRO2004.1
- A pushbutton switch, attached to a 4060 CMOS 14 bit binary counter IC,
- selects one of the 16 groups. The 4 counter output leads are used to select
- the high order 4 bits of the HM62256. The new group select pushbutton switch
- is mounted on the front panel, in place of the headphone jack.
-
- How can you tell which group you are in? A specially programmed EPROM
- (type 2716, 2532, or 2732) is addressed by the ouput of the counter. The
- EPROM output is connected to a 7 segment LED readout, mounted in place of the
- Sound Squelch pushbutton. The readout indicates groups 0, 1, 2, 3, 4, 5, 6,
- 7, 8, 9, A, B, C, D, E, and F.
-
- [Note: If I were to expand the memory in my PRO-2004, I would use just the
- new HM62256 memory IC and a BCD switch instead of the pushbutton. This would
- eliminate two of the three ICs, and the 7 segment readout. Sorry, I cannot
- provide further information, nor a reference, as the sheets sent to me
- contained no name or address. - Bob
- Parnass] Bob Parnass AJ9S